Thunder Tiger - Raptor 50 Titan

Specification:
Full Length of fuselage: 1220mm (48.03")
Full width of fuselage: 1400mm (5.51")
Total height: 400mm (15.74")
Main rotor dia: 1345mm (52.95")
Tail rotor dia: 236mm (9.29")
Gear ratio: (STD) : 1:8.5:4.56 / (OP) : 1:8.73:4.56
Full equipped weight: 3000g (6.6 lbs)

 

 

The Raptor 50 Titan combines all the key features needed for Extreme 3D flight. Whatever the maneuver we are sure you will feel the performance that the Titanium provides.

This model was designed and engineered by the World-renowned Mr.Shigetada Taya. It combines elements of his previously successful designs with today's advanced technologies. Combined with all the features of Raptor 50 V2, the new Raptor 50 Titan adds more new features—longer tail boom to fit 620mm blade, push-pull system for collective pitch control & elevator control, rear mounted tail rotor servo plate, harden main shaft and more.

With all the new features included, the Raptor 50 Titan is the best power-to-weight ratio and accuracy control system of any 50 class helicopter in the market. For 3-D pilots, Raptor 50 Titan will make you enjoy executing crisp maneuvers like – Climbing Tic-Toc, Chaos, Death Spirals and any other radical maneuver that pilots can dream of. Beginners and advanced 3-D pilots will be impressed with this new Raptor, The Raptor 50 Titanium.


CALIBER 5

Specifications
Length: 1160mm
Width: 220mm
Height 400mm
Weight: 3100g (approx)
Main Rotor: 1340mm
Gear Ratio: 9.6:1:5
Engine: 50 class (sold separately)
R/C System: 6-ch, 5 servos, 1 gyro for R/C helicopters
(sold separately)

The all new Caliber 5 is a newly designed semi assembled 50 class helicopter. The lightweight monocoque composite frame features a low stance for less rotating mass during axial 3D aerobatics. The Caliber 5 is designed with the the advanced 3D pilot in mind. The precision linkages and the sliding MMS tray are easily adjustable for new pilots input as well as the precise demands of the advanced pilot. The Caliber 5 is easily converted to the Electronic Mixing System ( EMS) with the optional linkage set and the supplied motor mount accepts both the YS and OS 50 class glow engine.

Features
  • Carbon main rotors finished in gel coat are included as standard feature - at this incredible price.
  • Adjustment-friendly MMS control. Servo bed slides out so the variable pitch of each control input can be adjusted separately.
  • Aileron, elevator and pitch control all use push-pull linkages for sharp and reliable control.
  • The unique resin monocoque frame produces the strength and rigidity for superior 3D flight.
  • Radio box for receiver and battery provides organized management of wiring.
  • Equipped with 80cc sub fuel tank suitable for intensive 3D acrobatic flight.
  • Full ball bearing specifications including critical linkage bellcranks.
  • Latest styling from low height & lightweight brace and sharp body.
  • Semi-assembled mainframe and tail boom assembly means only a short time is needed to complete assembly.
  • Equipped with precision metal parts such as aluminum clutch drum and pulley combined with steel/resin swash plate, steel head (yoke, center hub, see-saw) to meet the demands of 3D flying.
  • Converts to EMS (Electronic Mixing System) with optional linkage set. (CA5140)

 

Heli-Max Axe EZ EP Mini RTF

Specifications

  • Main Rotor Span: 13.5" (340mm)
  • Height: 7" (180mm)
  • Fuselage Length: 14.5" (370mm) Weight: 7.5oz (213g

FEATURES:

  • Airframe: Ribbed to prevent flex from affecting handling
  • Fuselage: Painted polycarbonate
  • Motors: Two 130 size
  • Radio: Tactic 4-channel FM with charge jack, trainer system (trainer cord required), micro servos, combination ESC/Gyro/ Receiver mixer board The transmitter can be used as a student trainer box only. It does not have a trainer switch that would allow it to be used as the master or teacher box
  • Main Blades: Plastic, contra-rotating, four installed on heli and four spares
  • Drive Train: Ball bearing equipped
  • Training Gear: Carbon rods, fittings and four foam balls **NOTE Training Gear can be found in the package by removing the styrofoam tray and looking underneath**
  • Landing Gear: Two-piece molded plastic with extra set included
  • Battery: 800mAh 2-cell 7.4V LiPo with Red 2-pin JST connector
  • Battery Charger: 110V wall type 500mAh output with Red 2-pin JST connector
  • Warranty: Heli-Max guarantees the kit free from defects in both material and workmanship at the date of purchase.
  • Warranty does not cover any component parts damaged by use or modification.

INCLUDES: Heli-Max Axe EZ Mini Helicopter with two 130 size motors, extra set of blades and landing gear, FM radio system, battery, charger, decals and illustrated instruction manual

REQUIRES: Eight AA batteries for transmitter

Heli-Max Axe CP-L Micro EP Helicopter RTF

Specifications

  • Main Rotor Span: 20.75" (528mm)
  • Height: 8.125" (206mm)
  • Fuselage Length: 23" (584mm)
  • Weight: 16.5oz (468g) without battery

FEATURES:

  • CCPM: eCCPM Electronic Cyclic Collective Pitch is simpler and more responsive than mechanical CCPM. Input is mixed in radio using only three control rods for the 120° swash plate minimizing friction and slop and insuring quicker, stronger and more precise control
  • Airframe: Resilient unibody that functions as a roll cage to reinforce critical stress points while allowing cooling air circulation
  • Main Motor: 380 size main motor with Purple anodized aluminum heat sink
  • Tail Motor: N60 tail motor
  • Radio: Heli-Max true 5-channel FM system with servo reverse, LED power indicators, idle-up switch, trainer port and switch, charge jack, micro receiver and three micro servos
  • Flight Modes: Normal and Idle Up
  • Ball bearings: Full set
  • Main Blades: Symmetrical, constructed of wood
  • Tail Boom: Anodized aluminum
  • Tail Rotor Skid: Protects the blades and functions as vertical stabilizer during forward flight 3 in 1 mixer board (easy receiver replacement if necessary)
  • Battery: 3S 950mAh balanced LiPo battery with Deans micro plug
  • Battery Charger: Balancing type with 12VDC adapter and 110VAC adapter
  • Training Gear: Composite rods with four foam balls
  • Warranty: Heli-Max guarantees this kit free from defects in both material and workmanship at the date of purchase. This warranty does not cover any component parts damaged by use or modification.

INCLUDES: Heli-Max Axe Mini Helicopter with 5-channel FM radio system, 3S 950mAh LiPo battery, AC/DC balancing charger with adapters, training gear, manual, training DVD, 380 size main motor, N60 tail motor, 3-in-1 ESC/gyro/mixer unit, decal sheet

REQUIRES: Eight AA batteries for transmitter. Foam safe CA glue